How do I charge the battery using the charger?Updated a month ago

To charge your Hypershell battery, follow these steps:

1. Prepare the charger: Use the Hypershell 65W Charger (optional) or a compatible 65W PD third-party charger.

2. Insert the battery:

   • Remove the Battery Protection Cover

   • Insert the battery into the hip lever of the exoskeleton until you hear a locking click

Once the battery is securely installed, connect the charging cable and charger to the charging port on the hip lever. Plug the charger into an AC power supply. You’ll know the charging process has started when the status LEDs on the right leg lever display a flowing light pattern.

3. Connect the charger:

   
   

   • Plug the charging cable into the charging port located on the hip lever

   • Connect the charger to an AC power supply

4. Check charging status:

   
   

   • The status LEDs on the right leg lever will show a flowing light pattern, indicating that charging has started

5. Finish and disconnect:

   
   

   • Charging is complete when all status LEDs turn white

   • A full charge typically takes about 90 minutes

   • Once charged, unplug the charger and disconnect the cable

If you have any questions or run into issues, feel free to contact the Hypershell support team for help.